Epoxy Guys, Concrete Floor Coatings
Concrete floor grinder with a dust shroud on a Rhode Island garage slab, half ground clean and half old, stained concrete

Concrete floor resurfacing

Concrete Floor Resurfacing in Rhode Island

We grind off old paint and peeling coatings, fill cracks and spalled spots, and smooth rough concrete so a new floor coating has something solid to bond to.

  • 500+ customer reviews
  • Licensed & insured in RI
  • Old coatings ground off
  • Cracks and spalling repaired
  • Ready for a new coating

Get Your Free Estimate

Prefer to talk? Call (401) 205-8970

Concrete floor resurfacing

What Is Concrete Floor Resurfacing?

Floor resurfacing is the repair work that brings a worn concrete floor back to a sound, clean surface. Old paint, peeling epoxy and sealers are ground off, and cracks, pits and spalled spots are filled and ground flush.

Most resurfacing jobs we do end with a new coating. A floor that peeled once will peel again if the new coating goes over the same problem, so the old layer comes off down to clean concrete first.

In Rhode Island, a lot of that damage comes from winter. Road salt and freeze-thaw cycles pit and flake the top of the slab, especially near the garage door where cars drip all season.

What's included

What Goes Into Resurfacing a Floor

The work depends on what's on the floor and what's wrong with the slab. These are the four parts we scope at the estimate.

  • Coating Removal

    Paint, peeling epoxy and old sealers are ground off down to clean concrete.

  • Crack Repair

    Cracks are opened up and filled so they don't come back through the new floor.

  • Spall and Pit Patching

    Salt-damaged, flaking and pitted spots are patched and ground flush.

  • Smoothing the Slab

    High spots and rough patches are ground down so the new coating goes on even.

How it works

How We Resurface a Concrete Floor

Resurfacing and the new coating are usually one job, done back to back.

  1. Step 1: Look at the Floor

    At the estimate we check what's on the floor, why it failed and how deep the damage goes.

  2. Step 2: Grind It Off

    Old coatings and paint come off down to clean, open concrete.

  3. Step 3: Repair the Slab

    Cracks, spalls and pits are filled and ground flush with the floor.

  4. Step 4: Coat It

    The new coating system goes on the clean, repaired slab.

Why floors fail

Why Old Garage Floor Coatings Peel

Most of the floors we resurface were coated before. They usually failed for one of three reasons.

  • Paint on Unground Concrete

    Paint or kit epoxy rolled onto washed or etched concrete never gets a strong bond.

  • Hot Tire Pickup

    Hot tires soften thin coatings and pull them up, starting where you park.

  • Moisture From Below

    Water coming up through the slab pushes a coating off from underneath.

Cost

What Does Floor Resurfacing Cost?

Resurfacing is priced with the new coating, by the size of the floor and the work it takes to get it clean. A thin layer of paint grinds off faster than a thick, well-stuck coating, and deep spalling takes more patching than hairline cracks.

We price it at a free on-site estimate, after we've seen what's on the floor and how deep the damage goes.

What moves the price

  • Floor size
  • Old coating thickness
  • Depth of damage
  • New finish

Related services

The Coating That Goes On Top

Once the floor is resurfaced, these are the coatings that go on it.

  • Two-car garage in a Rhode Island home with a tan, gray and white flake epoxy floor, a bicycle on the wall and a white garage door

    Garage Epoxy Flooring

    A flake epoxy floor built for road salt, hot tires and oil.

    • Full flake
    • Salt resistant
  • Finished basement in Rhode Island with a light gray epoxy floor, a sectional sofa and recessed lights

    Basement Epoxy Flooring

    A solid, flake or metallic finish for the basement.

    • Seals the slab
    • Easy to clean
  • Warehouse in Rhode Island with a light gray epoxy floor, yellow safety lines, pallet racking and a loading dock door

    Commercial Floor Coatings

    Coatings for warehouses, showrooms and light industrial floors.

    • Safety striping
    • Heavy traffic

Where we work

Floor Resurfacing Across Rhode Island

We resurface and coat floors in these Rhode Island towns, with offices in Providence, Cranston, Narragansett and Newport.

Asked often

Floor Resurfacing Questions

Can you fix spalling from road salt?

Shallow spalling and pitting can be patched and ground smooth during resurfacing. A slab that is breaking up or has deep damage may need concrete work before it can be coated, which we tell you at the estimate.

Can you remove a peeling DIY epoxy kit?

Yes. Kit coatings are one of the most common things we grind off. It comes off down to clean concrete, and the new coating bonds to that.

Do I need a new coating after resurfacing?

Resurfacing is the prep for a new coating, and most jobs end with one. Freshly ground concrete is open and stains easily if it's left bare.

Is grinding dusty?

Grinding concrete makes dust, so the grinders run with dust shrouds. We ask that doors into the house stay closed while we work.

Will cracks come back through the new floor?

Cracks are filled before coating, but a crack that is still moving can show again over time. We point out any moving cracks at the estimate.

Free on-site estimate

Get a Free Floor Resurfacing Estimate

Tell us what's on the floor now and the town it's in. We'll call to set up a free on-site estimate.

  • Free on-site estimate
  • Licensed and insured in Rhode Island
  • Written warranty

Tell Us About Your Floor

Prefer to talk? Call (401) 205-8970

Call