Epoxy Guys, Concrete Floor Coatings
Warehouse in Rhode Island with a light gray epoxy floor, yellow safety lines, pallet racking and a loading dock door

Commercial floor coatings

Commercial Floor Coatings in Rhode Island

Epoxy floor coatings for warehouses, showrooms, retail spaces and light industrial floors, with joint repair, safety lines and a schedule planned with you before we start. Licensed and insured in Rhode Island.

  • 500+ customer reviews
  • Licensed & insured in RI
  • Joint and crack repair
  • Safety lines and zones
  • Schedule planned with you

Get Your Free Estimate

Prefer to talk? Call (401) 205-8970

Commercial floor coatings

What Is a Commercial Floor Coating?

A commercial floor coating is an epoxy system bonded to the concrete slab of a business: a warehouse, a showroom, a store, an office or a light manufacturing space. It seals the concrete, brightens the room and gives you a surface that cleans with a mop or a scrubber.

Commercial floors take more than a garage: forklifts and pallet jacks, carts, foot traffic all day and spills that don't get cleaned up right away. The coating system and its thickness are picked for that use.

Lines and zones go in as part of the job. Walkways, forklift lanes, loading areas and no-park zones can be marked in the floor instead of with tape that peels.

What's included

What Goes Into a Commercial Floor Coating

Every commercial floor is scoped at the estimate, but these four parts are in almost every job.

  • Surface Grinding

    The slab is ground to remove sealer, curing compound, old coatings and contamination.

  • Joint and Crack Repair

    Control joints, cracks and spalled edges are filled so wheels roll over them cleanly.

  • Coating System

    Base coat, any flake or color, and a topcoat chosen for the traffic the floor carries.

  • Lines and Zones

    Walkways, forklift lanes and work zones marked in the coating to your layout.

How it works

How a Commercial Floor Gets Coated

The work is the same as any floor we coat. The planning is what changes, since the space usually needs to keep running.

  1. Step 1: Site Visit and Scope

    We measure, check the slab and talk through traffic, chemicals, lines and the areas you can't close.

  2. Step 2: Schedule Planned With You

    We agree on the order of the work and when each area goes back into use before we start.

  3. Step 3: Prep and Coat

    Grinding and repairs, then the coating system, then lines and zones.

  4. Step 4: Cure and Handover

    We walk the floor with you and tell you when it can take foot traffic, carts and equipment.

Why coat it

Why Businesses Coat Their Concrete Floors

Bare concrete dusts, stains and is hard to keep looking clean. A coating fixes all three, and adds a few things bare concrete can't do.

  • Easier to Clean

    A sealed floor mops or scrubs clean, and spills don't soak into the slab.

  • A Brighter Space

    A light floor reflects the light you already pay for, across the whole building.

  • Marked Traffic Lanes

    Lines in the coating show people and forklifts where to go, and they don't peel like tape.

Cost

What Do Commercial Floor Coatings Cost?

Commercial floors are priced by square foot, and the rate depends on the slab's condition, the coating system the floor needs and how much line work goes in. Large open floors usually cost less per square foot than small ones broken up by racking and equipment.

We price every commercial floor after a site visit, with the scope and schedule written into the quote.

What moves the price

  • Square footage
  • Slab condition
  • Coating system
  • Lines and markings

Related services

Other Floors We Coat

Businesses with these floors often ask about the jobs below too.

  • Auto repair shop in Rhode Island with a gray epoxy floor, yellow safety lines, a blue two-post lift and a red tool chest

    Auto Shop Floor Coatings

    Coatings for repair bays that take oil, coolant and hot tires.

    • Oil resistant
    • Lift bays
  • Concrete floor grinder with a dust shroud on a Rhode Island garage slab, half ground clean and half old, stained concrete

    Floor Resurfacing

    Grind off failing coatings and repair the slab before recoating.

    • Crack repair
    • Old coating removal
  • Glossy metallic epoxy floor with swirls of silver and charcoal in a Rhode Island home gym, with a weight bench by the far wall

    Metallic Epoxy Flooring

    A poured metallic finish for showrooms and retail floors.

    • One of a kind
    • High gloss

Where we work

Commercial Floor Coatings Across Rhode Island

We coat commercial floors in these Rhode Island towns, with offices in Providence, Cranston, Narragansett and Newport.

Asked often

Commercial Floor Coating Questions

Can you work around our business hours?

We plan the schedule with you at the site visit, including which areas get coated first and when each one can go back into use. That schedule is part of the quote.

Does the whole building need to be empty?

Only the area being coated needs to be clear. Larger floors can often be done in sections, so the rest of the space keeps working. We plan the sections at the site visit.

Can you add safety lines and zones?

Yes. Walkways, forklift lanes, loading areas and work zones can be marked in the coating in the colors and layout you need.

Can you coat over an existing floor coating?

If the old coating is sound and well bonded, sometimes. If it's peeling, worn through or contaminated, we grind it off first. We decide that at the site visit.

Do you coat floors that see forklifts?

Yes. Forklift traffic is one of the things we ask about at the site visit, because it decides the coating system and its thickness.

Free on-site estimate

Get a Free Commercial Floor Estimate

Tell us about the space, its size and the town it's in. We'll call to set up a site visit.

  • Free on-site estimate
  • Licensed and insured in Rhode Island
  • Written warranty

Tell Us About Your Floor

Prefer to talk? Call (401) 205-8970

Call