Epoxy Guys, Concrete Floor Coatings
Auto repair shop in Rhode Island with a gray epoxy floor, yellow safety lines, a blue two-post lift and a red tool chest

Auto shop floor coatings

Auto Shop Floor Coatings in Rhode Island

Floor coatings for repair shops, detailing bays and service garages that take oil, coolant, hot tires and jack stands, with bay lines and a topcoat picked for the fluids in your shop.

  • 500+ customer reviews
  • Licensed & insured in RI
  • Coated around lifts
  • Bay and walkway lines
  • Topcoat for shop fluids

Get Your Free Estimate

Prefer to talk? Call (401) 205-8970

Auto shop floor coatings

What Is an Auto Shop Floor Coating?

An auto shop floor coating is an epoxy system built for a working bay. It seals the concrete against oil, coolant and the rest of what drips off a car, and it gives you a bright floor that cleans with a squeegee and a mop.

Shop floors take more abuse than a home garage: jack stands, floor jacks, creepers, dropped tools and cars coming in hot. The coating system and topcoat are picked for that, and for the chemicals you actually use.

Repair shops, tire shops, detailing bays, body shops and fleet garages all fit here. A light floor also helps when a bolt or a clip hits the ground.

What's included

What Goes Into an Auto Shop Floor

Shop floors usually come with years of oil in the concrete, so prep is most of the job.

  • Grinding Around Lifts

    The slab is ground right up to lift bases, drains and walls so the coating bonds everywhere.

  • Oil-Soaked Spots

    Oil-saturated concrete is cleaned and treated, since coatings won't bond to oil.

  • Coating and Topcoat

    A base coat and a topcoat picked for the fluids and traffic in your shop.

  • Bay and Walkway Lines

    Bays, walkways and no-park areas marked in the floor to your layout.

How it works

How We Coat a Shop Floor

A shop can't stop for long, so the schedule gets as much attention as the floor.

  1. Step 1: Visit and Scope

    We check the slab, measure the bays and ask what chemicals and equipment the floor sees.

  2. Step 2: Plan the Downtime

    We agree on which bays go first and when each one is back in service.

  3. Step 3: Prep and Coat

    Grinding, oil treatment and repairs, then the coating, topcoat and lines.

  4. Step 4: Cure and Handover

    We walk the floor with you and tell you when it can take cars, lifts and jacks.

Why coat it

Why Coat an Auto Shop Floor?

A coated floor doesn't just look better on the shop's review photos. It changes how the bay works day to day.

  • Spills Clean Up

    Oil and coolant sit on the surface and squeegee off instead of soaking into the slab.

  • Brighter Bays

    A light floor bounces light under the car and makes dropped parts easier to find.

  • A Shop Customers Trust

    A clean, marked floor tells customers the shop is run with care.

Cost

What Does an Auto Shop Floor Coating Cost?

Shop floors are priced by square foot. The rate depends on how much oil is in the concrete, how many lifts, drains and edges there are to work around and how much line work you want.

We price every shop after a site visit, with the scope and the downtime plan written into the quote.

What moves the price

  • Shop size
  • Oil in the concrete
  • Lifts and drains
  • Topcoat and lines

Related services

Other Floors We Coat

Shop owners often ask about these floors too.

  • Warehouse in Rhode Island with a light gray epoxy floor, yellow safety lines, pallet racking and a loading dock door

    Commercial Floor Coatings

    Coatings for warehouses, showrooms and light industrial floors.

    • Safety striping
    • Heavy traffic
  • Two-car garage in a Rhode Island home with a tan, gray and white flake epoxy floor, a bicycle on the wall and a white garage door

    Garage Epoxy Flooring

    A flake epoxy floor for the garage at home.

    • Full flake
    • Salt resistant
  • Concrete floor grinder with a dust shroud on a Rhode Island garage slab, half ground clean and half old, stained concrete

    Floor Resurfacing

    Grind off a failing shop coating and repair the slab.

    • Crack repair
    • Old coating removal

Where we work

Auto Shop Floor Coatings Across Rhode Island

We coat shop floors in these Rhode Island towns, with offices in Providence, Cranston, Narragansett and Newport.

Asked often

Auto Shop Floor Coating Questions

Can you coat around a two-post or four-post lift?

Yes. We grind and coat up to the lift bases. Lifts that can be unbolted are sometimes moved so the floor goes under them, which we decide at the site visit.

Will brake fluid or solvents damage the floor?

Some shop chemicals are harder on coatings than others. We ask what you use and pick the topcoat for it. Like any floor, spills should be wiped up rather than left to sit.

Can you coat a floor that has years of oil in it?

Usually, yes. Oil-soaked concrete is cleaned and treated during prep. Badly saturated spots are checked at the site visit, since coatings won't bond to oil.

Can you mark bays and walkways?

Yes. Bay lines, walkways, customer areas and no-park zones can be marked in the coating in the colors you want.

Is a coated shop floor slippery?

A smooth coating can be slick when it's wet or oily. A grip texture can go in the topcoat, and flake finishes have more grip than smooth ones. We talk through it for wash and detailing bays.

Free on-site estimate

Get a Free Shop Floor Estimate

Tell us how many bays you have and the town the shop is in. We'll call to set up a site visit.

  • Free on-site estimate
  • Licensed and insured in Rhode Island
  • Written warranty

Tell Us About Your Floor

Prefer to talk? Call (401) 205-8970

Call